| |
|
|
| |
Vector
Interchangeable Lens Changing Instructions |
|
| |
|
The lenses are relatively easy to exchange once you have
done it a time or two but it is certainly a bit more
difficult to describe than it is to accomplish. |
|
| |
|
 |
|
| |
|
|
|
| |
|
Lens Removal Right Side
·
Hold the sunglasses with the front facing at you. Place
your right pointer finger at (Point A) and your right
thumb at (Point C). Using both hands you can spread the
bridge slightly while shoving the lens downward with
your right pointer finger and right thumb. You will feel
the tab at (Point A) come free at which time you will be
able to pull straight down and slightly left to release
the tab at (Point B). |
|
| |
|
 |
|
| |
|
 |
|
| |
|
Lens Removal Left Side
|
|
| |
|
|
|
| |
|
 |
|
| |
|
| |
● |
Lens Installation |
| |
|
|
| |
● |
I prefer to install the left side first. With
the frames facing you, slide the outer tab at
(Point E) into place. Then slide the inner lens
tab along the nose piece’s inner groove while
squeezing at (Point F) and (Position G) until
you feel the lens tab snap firmly into place.
|
| |
|
|
| |
● |
Note: Most people are afraid to bend the
frames while removing and installing the lens.
Don’t be. These frames are ANSI Z87.1 rated.
They are extremely flexible and strong. In order
to remove and install the lenses it requires
some flexure of the frame. We recommend that you
are careful the first few times until you are
comfortable with this procedure but we also
believe you will find it easy enough after one
or two times. |
|
|
| |
|
|
Related
Google Websites